PRODUCTS
‹
›
‹
›
CSLS-1/2C Manhole Leak Detection Sensor
1.CSLS-1 Manhole Leak Detection Sensor(discriminating)
CSLS-1 manhole leak detection sensor is used to monitor whether liquid exits in the manhole. Two alarm points are set to monitor the liquid level and it can distinguish the liquid is water or fuel. Self-detection function can detect open circuit or short circuit.
Function:
● Two alarm points to detect liquid level
● Water alarm
● Fuel alarm
● Short alarm
● Open alarm
● Can detect the hydrocarbon, and trigger fuel alarm
Parameter:
● Operating temperature range: -40℃~60℃(fuel); 0℃~60℃(no freezing water)
● Length of sensor cable: 2m
● Size: Length 610mm; Diameter 55mm
● Alarm points: 30mm(low level); 285mm(high level); 4mm(fuel)
● Accuracy: ≤2mm
● Enclosure protection class: IP68
2.CSLS-2C Manhole Leak Detection Sensor
CSLS-2C manhole leak detection sensor is used to monitor whether liquid exits in the manhole. Self-detection function can detect open circuit or short circuit.
Function:
● Two alarm points to detect liquid level
● Liquid alarm
● Short alarm
● Open alarm
Parameter:
● Operating temperature range: -40℃~60℃(fuel); 0℃~60℃(no freezing water)
● Length of sensor cable: 2m
● Size: Length 610mm; Diameter 55mm
● Alarm points: 30mm(low level); 285mm(high level)
● Accuracy: ≤2mm
● Enclosure protection class: IP68
RELATED PRODUCTS
SFLS-2F Gap Layer Bottom Double-walled Tank Leak Detection SensorLearn More- HLS-1D Hydrostatic FRP Double-wall Tank Leak Detection SensorFRP double-wall tanks are usually filled with monitoring fluid in the interstice. Normally, the monitoring fluid level should keep in the middle of the reservoir which is on the top of the tank. OKet® provides HLS-1D dual-point hydrostatic sensor which can accurately detect fluid-level changes in reservoir in high or low level change. If the brine solution seeps into the tank, lowering the level in the reservoir, the sensor triggers a low-level alarm. If an outer wall leak occurs and groundwater seeps into the tank, a high alarm is activated.Learn More
- SFLS-2DA/2C FRP-Steel Double-wall Tank Leak Detection SensorFor FRP-Steel double-wall tanks, we install a SFLS-2DA/2C double-wall tank leak detection sensor into the lowest point of the interstitial space which is usually on the bottom of the tank. Any leak of the tank occurs, it will trigger an alarm. Usually, the leak of outer wall will lead water from the soil flow into the bottom of the interstitial space, and the leak of inner wall will lead fuel from the inside of the tank flow into the bottom of the interstitial space, then the liquid will be detected by the SFLS-2DA/2C double-wall tank leak detection sensor and trigger an alarm.Learn More
- FSLS-1/2C Tank Containment Sump/monitoring Well Leak Detection SensorFSLS-1/2C is installed in the riser pipe of tank containment sump or a groundwater monitoring well to monitor if there is any liquid in the tank containment sump or fuel on the underground water in the well in real time. Three alarm points are set to detect the liquid is fuel or water. Self-detection function can detect open circuit or short circuit.Learn More
- VTLS-1 Inner Lining Method Double-wall Tank Vacuum Negative Pressure Leak Detection SensorIt is suitable for the vacuum negative pressure leakage measurement method of lining method. By detecting the pressure of the middle layer of the double layer tank, the pressure state of the middle layer of the double layer tank of the lining method can be monitored in real time to judge the leakage of the oil tank.Learn More
- DLLS-2DA/2C Double-wall Pipeline Leak Detection SensorThe double-wall pipeline is sloped during the installation to ensure its contents will drain back into the storage tank . So we could install a DLLS-2DA/2C double-wall pipeline leak sensor which connects the lowest point of the interstial space of the double-wall pipeline with a fuel collecting tube .Learn More
GET A QUOTE